Rossi Cold Fusion & LENR

There has been a flurry of activities in October where noted scientists from around the world traveled to the city of Bologna, Italy to observe and test the Rossi Energy Catalyzer or e-Cat. Many of these are theoretical physicists who are curious about the e-Cat and want to know more about the reaction process; is it fusion or some other nuclear process? Most agree that the large output of energy excludes the possibility of a chemical reaction. Expert testing has confirmed continuous production of heat and the safety of the e-Cat reactor.

Dr Rossi has been very generous with his time and use of equipment to try and satisfy the skeptics who continue to question the energy output of the e-Cat. The testing was designed to clarify the issue of steam quality by sealing the output water and steam and using a heat exchanger to transfer the heat. Improved data acquisition and test instruments helped make better output measurements. The testing on October 6 lasted for 12 hours and the e-Cat was allowed to operate in self-sustained mode with no input for 4 hours. Then the e-Cat module was taken apart (except the reactor core) and the components were measured and weighed. Any loss or gain in size or weight would be noted. All this should convince the skeptics that the e-Cat if for real!

There are two separate goals in the development of the Energy Catalyzer:
1. Verify the nature of the process as chemical or nuclear.
2. Work on the applications of this new technology for commercial use.

The application engineering could be addressed first and then allow theoretical physicists time to examine the output components for a clue to the nature of the process. A complete and independent evaluation of the e-Cat can be done at the University of Bologna, Italy.

Dr. Rossi identified all the variables in the Energy Catalyzer process and developed a system to control them. At a glance, I see Dr. Rossi’s achievements with his e-Cat as:

· First to harness and control the energy of the Ni-H LENR reactor

· First to achieve large amounts of energy output using a special catalyst

· First commercial application of the Ni-H LENR reactor for home and industrial heating

The next demonstration and test will be in the United States sometime in October. “The measurements will be made by world top class scientists,” said Dr. Rossi. At this event, the first commercial launch of the Energy Catalyzer will be announced and that is scheduled for sometime in November. Dr. Rossi has stated the following:

1. The 1 MW Energy Catalyzer system will be tested for the US event.

2. All the characteristics (except confidential) of the 1 MW reactors and the new type of reactor will be discussed.

3. The first US customer (if the customer allows) will be named.

The impact of the Energy Catalyzer development is far reaching and will give the world a new, clean, cheap, safe and unlimited energy source. This Ni-H LENR reactor will be used initially for heating, then for generation of electricity. Soon, the e-Cat will power cars, boats, trucks, trains, planes and spacecraft. Eventually it will replace fossil fuels and nuclear energy power plants. With increasing CO2 in our atmosphere and fears of global warming, The Rossi e-Cat could reverse that trend and save the world from a global catastrophe.

Let us all pay attention to the development and application of the Rossi Energy Catalyzer e-Cats. This is our future energy source.

Tags: 1 MW Energy Catalyzer system, Ni-H LENR